The bag is made in plaited polyethylene. Colours : red, blue, green or  black according to availability.
The straps (2) of the handles are multicoloured or in the same colour of the bag. They are fixed to the bag thanks to the double sawn (3) which determines the upper end of the bag.

a) Side tongue
An elastic tongue (4) (black, multicoloured or the same colour of the bag) is fixed in the middle of each
handle (2) and inside the bag according to the drawing below each tongue (4) is fixed to the bag thanks to the double sawn (3) of the upper end and inside the bag (picture No. 1*)
 One of the tongues has at one of the ends a piece of Velcro (A) and another piece of Velcro at the other end (B) The pieces of Velcro (A) and (B) could fasten together hence the elastic tongue (4) could form a loop (5) when the two pieces of Velcro (A) et (B) are in contact and fixed together (picture 2*) The other tongue (4) fixed on the opposite side of the bag is the same as the first one and has two pieces of Velcro too (A) and (B). However it is fixed on the side of the bag inverting the positions of the two pieces of Velcro (picture 3 *)

b) Plastron
The plastron is a base (6) sewn on one of the ends of the bag, with a handle. It is fixed on one of the sides at at the level of the seam of the bottom of the bag (7), (picture 1*) It has on each of its sides two pieces of Velcro (8, 8a) and (9, 9a) precisely placed (picture 5*) It has two separate purposes:

- When it is on the side it forms an accommodation (10) in which we could place long objects like
for example bread, newspaper, leaflets (picture 1*) When not in use it serves to maintain the bag rolled up and facilitate its  storage.

- When the bag is open, it is maintained in position thanks to the pieces of  Velcro (8,8a) which we put on two pieces of Vecro (11,11a) placed on the side the bag (picture 5*)

- When it is in closed position around the rolled bag it is maintained in the position thanks to the pieces of Velcro (8,8a) wich are in contact with the pieces of Velcro (9,9a) (picture 6*)

c) Fasteners of the sides without handles
In order to maintain two bags placed side by side in a trolley, each side  without handle has on its external side a piece of Velcro (13) & (14).
Then each bag has on one of its sides a piece of Velcro which could cooperate with the piece of Velcro (14) placed on its opposite side (picture 7*)
All the dimensions are on the drawing. The validation of the bag counter-sample will be effective with the
delivery of ten samples.

Packaging
The bag is folded on the side © with the handles. Turn down the parts A and B on C Roll up the bag handles inside in direction of the plastron (P) Continue to roll up the bag inside the plastron (P) Maintain the bag rolled up putting in contact the Velcro

d) Dimensions of the rolled bag * :
Width 8 cm length 30 cm thickness 4 cm The bag is packed in transparent plastic sheet united at the  two ends.
One of these ends has a mean to hang up the bag .
An advertising label is placed around the bag before its introduction in  the sheath.

The weight of the rolled bag is about 110 g

During its use the bag could support about 50 kgs without breaking.

The elastic fasteners at the level of the handles are in flat elastic. They couldn’t support weight but they have simply a function of fastener. They keep the bag open in the trolley. The quick fasteners are in Velcro and they haven’t a function requiring a particular resistance.

You can receive upon request the Excel file with the technical pictures (739 ko)